You can create a section view to show a cross-section of a part. A source or parent view must already be available and updated before you can create a section view. The figure shows a parent view (1) and an associated section view (2).

You can create and save a cross section in Part or Assembly mode and show it in a drawing. When inserting a view, you can add a cross section to the view.

This Creo Parametric tutorial shows how to apply different 2D sections to a drawing view. Part 1 covers the following Sectioned Areas:FullHalfLocalFull and L...

This video will demonstrate how to create a section view within the drawing in Creo Parametric. It covers creating both planar and offset sections in two dif...

2009年4月3日 · Orient the section view you want to appear in 2d drawing and save the view. Add the view in 2d drawing. Double click the view, select the section tab. select the name of the section, done in 3d. then apply. To show the section arrow, right click the section view, and select add arrow, then select any view and the section arrow appear.

On the Sectioning tab, in the Setup group, click Show 2D View. A 2D view of the section opens. 2. Click the graphics area of the 2D view. The view becomes active. 3. Move the sectioning plane into position using any of these methods: Click or . Drag the slider. Select the slider, and then press the UP or DOWN or LEFT and RIGHT arrow keys.

2014年1月31日 · At the moment, I'm working to take 2D AutoCAD drawings and turning them into 3D Creo Parametric 2.0 models as well as to recreate the drawings in Creo. In particular, I'm floundering on how to make more complex section views display in my drawings. Attached is a simplified ref of the original AutoCAD views I'm trying to replicate.

2007年4月24日 · 1. From the VIEW TYPE menu, choose Partial View or Broken View. 2. Choose Section > Done > Local. Note: Local is not available for half views. It is available only if you choose Full View or Partial View from the VIEW TYPE menu. 3. Select a center point for the view and orient the view as desired. 4.

2017年8月25日 · Sometimes In Creo drawings, it is necessary to include 3D sectional view or Offset sectional cut to include inside components in the cross-section. In this article, we will discuss the complete sections in Creo Parametric.

2023年8月21日 · One work around would be to create the offset section view on the drawing but place it outside the drawing format border. It will not show up in the drawing when printed but will allow you to place the section lines for section C-C on a view within the border.